There’s never a perfect time for a malfunctioning oven, especially if the issue is when your oven is not heating up properly. Dealing with it means no more warm, homemade meals for you or for your guests. What’s even more frustrating is when you don’t know what the issue is. This is why we’ve decided to write this article, to help you troubleshoot your oven heating issue. You can always call an oven repair Charlotte company, if you live in Charlotte, or you can diagnose it yourself before making you service call. So, let’s see what the few things are you can check yourself to diagnose why your oven isn’t heating up properly.
Simple Checks First
- Power Source: This might seem obvious, according to Specialized Management Oklahoma, but double-check that your oven is plugged in and turned on at the wall outlet.
- Tripped Breaker: Look for a tripped circuit breaker in your home’s breaker box. Reset it by flipping the switch firmly to “off” and then back to “on.” If it trips again, consult an electrician.
- Oven Calibration: Some ovens allow for calibration if you suspect they’re running too hot or cold. Consult your user manual for specific instructions on how to adjust the temperature.
Let’s Look into It Deeper
- Heating Element (Electric Ovens): Visually inspect the heating elements (usually located at the top and bottom of the oven cavity) for signs of damage like cracks, breaks, or discoloration. If you turn the oven on to a high temperature (like 400°F) and they don’t glow red within a few minutes, they’re likely the culprit. Important safety note: Do not attempt to replace a heating element yourself unless you are comfortable working with electrical appliances.
- Temperature Sensor: This little device regulates the oven’s temperature by sending signals to the control board. A faulty sensor can lead to inaccurate heating. Consult your user manual to locate the sensor (it might be near the back of the oven cavity) and look for signs of wear or damage. Replacing a temperature sensor can be a DIY project depending on your comfort level.
- Oven Door Seal: A poor seal lets heat escape, making the oven work harder and less efficiently. Inspect the gasket around the oven door for cracks, tears, or worn spots. You can often purchase replacement seals online or from appliance parts stores.
When to Call an Electrician?
Sometimes, your appliance breakdowns can be connected to your home’s electrical system rather than the appliances themselves. If your appliances repeatedly breakdown, you might need to call a local electrician to look into it. It might be costly, but electricians in Charlotte aren’t as costly as electricians in Seattle, or other big cities like New York City and Chicago. Here are a few things that might signal the need of an electrician.
- Frequent Breaker Trips
- Flickering or Dimming Lights
- Burning Smell or Hot Outlets
- Signs of Rodent Chewing
- Water Damage
When to Call a Professional Appliance Repair Company?
If you tried to troubleshoot the problem and you weren’t able to solve it, or if you are uncomfortable replacing any parts yourself, it’s a good idea to call a qualified appliance repair technician for commercial oven maintenance. They will diagnose the issue and fix it quick and safely.
If you are attempting any repairs, make sure to consult your owner’s user manual. You will specific instruction for your oven model and in some cases, you can find troubleshooting steps.
